Fairdeal Corporation

Welding Stainless Steels to Any Other Steel and Overlays

Terroweld DS4 is a smooth running rapid flowing electrode giving a deposit that is strong and ductile for very good resistance to impact. The weld metal is also suitable for stainless overlays,buffer layer’ as they are known, on carbon steels prior to joining with other stanless steels, It is also used for joining stainless steels to any other steel.
ALLOYBASEFe, Cr, Ni, Mn, Mo

SPECIAL FEATURES

Easy of operationEasy slag peel off revealing shining beadThick bead facilitating smooth surfacing

APPLICATIONSRebuilding of impellers, shafts valve faces & seats, and turbine blades to provide resistance to heat, abrasion, and corrosion.Welding stainless steels to carbon steels, low alloy steels, cast steels and austeniticmanganese steel parts. Manganese steels and for depositing stainless tough overlays on cast steel and austenitic manganese steel parts.

ESAB SS 309L Plus is a rutile based, low carbon all positional electrode of 23Cr-13Ni type for joining of stainless steels to unalloyedor low alloyed steels. Also suitable for transition layers when surfacing mild or low alloyed steels with stainless steel weldmetal.

A medium coated , all position electrode for jobs of structural importance. The electrode operates with quite arc and deposits a smooth bead with fine ripples. It gives medium penetration , least spatter and easy slag removal. It is easy to operate in all positions inclusding vertical down.Suitable for general purpose mild steel welding, steel structures, tanks, railway wagons, storage tanks etc.

A medium coated , all position electrode for jobs of structural importance. The electrode operates with quite arc and deposits a smooth bead with fine ripples. It gives medium penetration , least spatter and easy slag removal. It is easy to operate in all positions inclusding vertical down.Suitable for general purpose mild steel welding, steel structures, tanks, railway wagons, storage tanks etc.

ApprovalsBIS

Covered electrodes, unalloyed

• BOHLER FOX N 6013
• BOHLER FOX N 63X
• MARUTI FS
• MARUTI - A1
• MARUTI - 44
• MARUTI - 66
• MARUTI - XL
• MARUTI 63X-AP (SPL)
• ULTRA 7016
• ULTRA 7018
• BOHLER FOX N EV 48
• BOHLER FOX N EV 48-1
• BOHLER FOX N EV 50
• BOHLER FOX N EV 50-1
• BOHLER FOX CEL +
• BOHLER FOX CEL 70-P
• BOHLER FOX CEL 80-P
• BOHLER FOX BVD 85

Covered electrodes, low alloyed

• BOHLER FOX N DMO Kb
• BOHLER FOX N DCMS Kb
• PHOENIX CHROMO 1
• BOHLER FOX N CM2 kb
• PHOENIX SH CHROMO 2 KS
• BOHLER FOX CrMo 2V
• BOHLER FOX CM 5 Kb
• BOHLER FOX CM 9 Kb
• THERMANIT CHROMO 9 V
• THERMANIT CHROMO 9 V MOD
• BOHLER FOX C 9 MV
• THERMANIT MTS 616
• BOHLER FOX EV 64
• BOHLER FOX 2.5 Ni
• BOHLER FOX EV 60
• BOHLER FOX EV 65
• BOHLER FOX EV 70
• BOHLER FOX N EV 85-G

Covered electrodes, high alloyed

• SUPERALOY - 1A
• SUPERALOY - 38
• BOHLER FOX N EAS 2-16
• SUPERALOY - 2A
• BOHLER FOX N EAS 4M-16
• BOHLER FOX N CN 23/12-16
• SUPERALOY-CW
• BOHLER FOX N SAS 2-16
• BOHLER FOX N CN 23/12 Mo-16
• BOHLER FOX A 7
• AVESTA 308L/MVR
• AVESTA 316L/SKR
• AVESTA 310
• BOHLER FOX SAS 4-A
• BOHLER FOX EAS 4 M
• BOHLER FOX EAS 2
• BOHLER FOX CN 13/4
• BOHLER FOX N CN 17/4 PH
• AVEST 904L
• AVESTA 2205
• BOHLER FOX CN 22/9 N-B
• AVESTA 2507/P100 Rutile
• BOHLER FOX CN 25/9 CuT
• AVESTA 253MA

Covered electrodes, nickel-base

• THERMANIT NICRO 182
• THERMANIT NICRO 82
• THERMANIT 625

 

 

ESAB FERROARC is a medium coated general purpose mild steel electrode, which operates on low OCV (50V) AC in all positions. It delivers smooth and stable welding arc with low spatter, excellent slag detachability and smooth weld bead appearance. The weld deposit is of radiographic quality.

Work Hardening for Extreme Impact and Abrasion

A basic coated electrode depositing an austenitic manganese steel weld metal. The deposit ishighly resistant to heavy impact and abrasion. The deposit is work hardenable. The electrode isrecommended for surfacing of worn-out austenitic manganese steel parts.It can also be used to give impact protection on carbon steels.

ALLOY BASEFe, Mn, Ni, Cr
SPECIAL FEATURES 

 Build-up is free from cracks (with proper welding procedure Superior arc stability than available grades of Mn Steel electrodes It is very easy to use in all positions.

APPLICATIONS

Austenitic manganese steel components, crusher jaws, crusher hammers, crusher mantles,dredger bucket teeth, cement grinder rings, manganese steel railway points & crossings, man-ganese steel components used in the mining industry.

PROPERTIES
Hardness: As deposited : 24 – 26 HRCWork hardened : 43 – 45 HRC

Electrode with basic coating, resistance to corrosion, suitable for welding of cast steel of similar composition or caststeel resistant to heat and alloyed to Cr-Ni, such as: ASTM A296, A297 and A351 G HT 30.

Suitable for Air tube Welding of HK 40 & HK 30 grades.

ESAB 28 is a medium heavy rutile coated mild steel electrode designed for welding of unalloyed structural steels in all positions. The electrode gives smooth radiographic quality weld with low spatter and smoke. Slag is self detachable and the bead shape is uniform and finely rippled

A rutile based general purpose mild steel electrode for Shielded Metal Arc Welding. 

Classification :AWS A5.1 E6013Welding Current : DC±, AC 50V

DescriptionESAB SW is a rutile coated generalpurpose mild steel electrode. It providessmooth & stable arc with low spatter andgood slag detachability. The electrode issuitable for all positional welding of platesand pipes.

ESAB 36H (SPL) is a basic coated low hydrogen iron powder electrode for low temperature applications. It is anall positional electrode for welding medium tensile and fine grained carbon steels. The electrode exhibits very goodmechanical properties after extended post weld heat treatment.

Classifications: SFA/AWS A5.1:E7018-1

Abrasion Resistant Hardfacing

This rutile-coated electrode gives an air-hardening type weld deposit, which is resistant to severe abrasion and moderate impact between metal to mineral wearing atresses. It providesmoderate resistance to corrosion and scaling

APPLICATIONS :
Bulldozer blades, excavator teeth, metal cutting & forming tools, hot & cold punching dies, bucketlips, chutes, conveyors, shears & croppers, oil expellers, pulping knives, ploughshares, roadgraders, crusher hammers, caterpillar treads, cane & bamboo cutting knives, etc. recommendedfor applications involving metal to mineral wear.
PROPERTIESHardness:55 - 58 HRC

A rutile based general purpose mild steel electrode for Shielded Metal Arc Welding. 

Classification :AWS A5.1 E6013
Welding Current : DC±, AC 50V

Description: ESAB SW is a rutile coated general purpose mild steel electrode. It provides smooth & stable arc with low spatter and good slag detachability. The electrode is suitable for all positional welding of plates and pipes.

Duksh Welding Electrode

Mild Steel welding rod can be used for general purpose fabrication in steel plants, storage tanks, furniture work.

We are engaged in offering Ador Welding Electrode to our clients. Our range of all products is widely appreciated by our clients.

ESAB SS 308L is a rutile based low carbon 20Cr-10Ni type stainless steel electrode with controlled ferrite that providesexcellent resistance to corrosion, cracking and high temperature scaling up to 800°C.

Excellent Welding of Copper Alloys.

Bronzoid 1 is an electrode that provides an alloy suitable for welding brass, bronze, deoxidized copper, cast iron, steels and dissimilar metals. It has easy slag detachability and produces homogeneous & sound weld metal free from porosity And cracks. Excellent colour match on bronze.

Characteristics• Versatile cuts through any metal• Exothermic coating concentrates arc• Suitable for high speed cutting, piercing hole of all metals• Ideal for MS, SS, CI, Cu-alloys, Al –alloys and Ni-alloys• Does not overheat.• Can withstand high amperageApplicationsPiercing, cutting, removing flash, risers and rivets.

STAVINOX 6013

It offers exceptional slag detachability and exhibits excellent impact notch toughness at 0"C.

UNIQUE FEATURES :

• Produces weld beads with a smooth and ripple-free finish, superior slag removal, and easy striking and re-striking.
• Enhanced arc force, improved penetration, stronger joints with no occurrences of cracking, defects or joint failures.
• Minimal spatter and optimal metal recovery.
• No occurrence of red hotness, and excellent shielding that produces X-Ray quality welding free from defects.
• Superior control over fluidity, welding in awkward positions, simplified manipulation of electrodes, faster and easier welding, and reduced fatigue with longer weld lengths per piece, and lower consumption of electrodes.

Preformed Carbides to Resist High Stress Abrasion.

Cobalarc 1 M is the ultimate in welding technology. It has autogenous fume shielding over preformed carbides in a tubular form, which gives the user genuine low heat input and infinite shelf life by dint of its non hygroscopic coating. It deposits fine chromium carbides in tough austenitic matrix and gives better abrasion resistance on mild and low alloy steel bases where impact requirement is limited. This will ensure excellent wear resistance on 12-14% manganese steel components.

Superon Stavinox 6013 Welding Electrode

It offers exceptional slag detachability and exhibits excellent impact notch toughness at 0"C.

UNIQUE FEATURES :

• Produces weld beads with a smooth and ripple-free finish, superior slag removal, and easy striking and re-striking.

• Enhanced arc force, improved penetration, stronger joints with no occurrences of cracking, defects or joint failures.

• Minimal spatter and optimal metal recovery.

• No occurrence of red hotness, and excellent shielding that produces X-Ray quality welding free from defects.

• Superior control over fluidity, welding in awkward positions, simplified manipulation of electrodes, faster and easier welding, and reduced fatigue with longer weld lengths per piece, and lower consumption of electrodes.