Fairdeal Corporation

1)Basic coated electrode with very good welding characteristics, including out of position work.

2)High impact properties at -300C, thus produces tougher weld.

3)Weld metal recovery about 115%, thus higher productivity.

4)Extremely good slag detachability thus greater weld appeal.

 5)Low spatter and finely rippled bead with regular profile reduces post weld dressing operations.

 6)Weld of consistent radiographic quality is achieved.

Semi-basic MMA electrode suitable for the welding of austenitic steels containing 16-20% Cr and 8-12%Ni (AISI 304, AISI 304L). The weld deposit has a 0.04% max Carbon content. Particularly suitable fornuclear, chemical and associated applications. Excellent weldability with a spatter free arc, self-releasingslag producing a very smooth bead appearance. Max service temperature +300°C. Efficiency 100%.Packed in vacpack system.

Rutile type electrode depositing Radiographic welds for structurals.

Code

AWS SFA 5.11 E 6013

IS ER 4211

Description

It is a medium coated all position rutile electrode. Radiographic welds are eminently suitable for structural jobs. Mn to C Ratio as also Mn to Si ratio enhance mechanical properties, without any hot/cold cracking. Autoslag release alongwith finely rippled welds make it welder-friendly. Smoke and spatter are negligible.

Advantage

Welds at low ocv in AC transformer
Striking and Restriking are good
Absence of pungent and irritant fumes
Versatile type for general fabrications.

STAVINOX 6013

It offers exceptional slag detachability and exhibits excellent impact notch toughness at 0"C.

UNIQUE FEATURES :

• Produces weld beads with a smooth and ripple-free finish, superior slag removal, and easy striking and re-striking.
• Enhanced arc force, improved penetration, stronger joints with no occurrences of cracking, defects or joint failures.
• Minimal spatter and optimal metal recovery.
• No occurrence of red hotness, and excellent shielding that produces X-Ray quality welding free from defects.
• Superior control over fluidity, welding in awkward positions, simplified manipulation of electrodes, faster and easier welding, and reduced fatigue with longer weld lengths per piece, and lower consumption of electrodes.

Basic coated electrode with very good welding characteristics, including out of position work.
 High impact properties at -300C, thus produces tougher weld.
Weld metal recovery about 115%, thus higher productivity. 

Extremely good slag detachability thus greater weld appeal.

Low spatter and finely rippled bead with regular profile reduces post weld dressingoperations.

Weld of consistent radiographic quality is achieved.

Base Materials :

S235JRG2 – S355J2, E295, E335, C35; boiler steels P235GH, P265 GH, P295GH, P355GH;fine grained structural steels up to S420N; shipbuilding steels A, B, D, E; offshore steels;pipe steels P265, P295, L290NB – L415NB, L290MB – L415MB, X42 – X56; cast steelsGS-38, GS-45, GS-52; ageing resistant steels Ast35 – Ast52 .

Basic coated electrode with very good welding characteristics, including out of position work. Weld metal recovery about 110%, thus higher productivity Extremely good slag detachability thus greater weld appeal.  Weld of consistent radiographic quality is achieved Good Mechanical properties with high impact at -30 °C.

Base Materials :

S235JRG2 – S355J2, E295, E335, C35; boiler steels P235GH, P265 GH, P295GH, P355GH;fine grained structural steels up to S420N; shipbuilding steels A, B, D, E; offshore steels;pipe steels P265, P295, L290NB – L415NB, L290MB – L415MB, X42 – X56; cast steelsGS-38, GS-45, GS-52; ageing resistant steels Ast35 – Ast52